This Series of Videos was presented at the webinar – supporting the publication of the new Cycle Design Manual
In conjunction with Engineers Ireland the NTA hosted a 3-part webinar series on the 2022 Cycle Design Manual (CDM).
The CDM draws on the experience of delivering cycling infrastructure across Ireland over the last decade, as well as learning from international best practice, and has been guided by the need to deliver safe cycle facilities for people of all ages and abilities. The new manual places more emphasis on the range of cycles that cycle infrastructure will have to accommodate and the recommendations focus on segregating cyclists from traffic where speeds and volumes make roads unsuitable for sharing.
3-part webinar series on the 2022 Cycle Design Manual (CDM)
As an introduction to the Cycle Design Manual, below are from the
“Introduction to the Cycle Design Manual” Webinar Series – recordings and presentation slides.
- Part 1 – Introduction & Cycle Links:
- Part 2 – Junctions & Crossings
- Part 3 – Implementation, Maintenance & SuDS
The Webinar includes contributions from:
- Joe Seymour, Head of Active Travel Investment, National Transportation Authority (Ireland)
- Noel Fennelly, Programme Manager, Active Travel Investment, National Transport Authority
- Finola O’Driscoll, Senior Programme Manager, Active Travel Investment, National Transport Authority
- Marty Boran, Technical Dirctor at AECOM
- Michael Dunne, ROD – CSEA, Senior Scheme Designer in the NTA Active Travel Support Office
- Philip Lee, Senior Scheme Designer in the NTA Active Travel Support Office (ATSO)
- Anthony Morrow, Senior Programme Manager, Transport Planning & Investment, NTA
Part 1 – Introduction & Cycle Links
Chair: Finola O’Driscoll, NTA
- Introduction and legislative changes | Joe Seymour, NTA
- Main requirements and design principles | Noel Fennelly, NTA
- Cycle links | Philip Lee, ROD – CSEA
- Geometric requirements | Joe Seymour, NTA
- Part 1 – Introduction & Cycle Links:
- Part 2 – Junctions & Crossings
- Part 3 – Implementation, Maintenance & SuDS
Part 2 – Junctions & Crossings
Chair: Paul McGartoll, NTA
- Priority junctions | Joe Seymour, NTA
- Signal-controlled junctions | Noel Fennelly, NTA
- Roundabouts | Philip Lee, ROD – CSEA
- Crossings | Philip Lee, ROD – CSEA
Part 3 – Implementation, Maintenance & SuDS
Chair: Anthony Morrow, NTA
- Implementation & Maintenance | Joe Seymour, NTA
- Cycle Parking | Finola O’Driscoll, NTA
- Legislative changes | Marty Boran, AECOM
- SuDS Advice Note for Active Travel Schemes | Michael Dunne, ROD – CSEA
- Part 1 – Introduction & Cycle Links:
- Part 2 – Junctions & Crossings
- Part 3 – Implementation, Maintenance & SuDS
